Forest Grower®UFO51X3W 153w UFO Full spectrum High power led grow light for medical plants vegetables indoor grow tent system Modular design
|LED Quantity||48LEDs 3w||75LEDs 3w||51LEDs 3w|
|Output Voltage||60-90V DC||60-90V DC||60-90V DC|
|Working Environment||-20∼40℃, 45%∼80%RH||-20∼40℃, 45%∼80%RH||-20∼40℃, 45%∼80%RH|
Follow is our F series LED Grow Light's Specification.
|LED Quantity||50LEDs 3w||100LEDs 3w||100LEDs 3w||150LEDs 3w|
|Spectrum Color ||Full Spectrum ||Full Spectrum||Full Spectrum ||Full Spectrum|
|Chip Brand ||3w Epileds ||3W Epileds||3W Epileds||3W Epileds|
|Certification||CE /RoHs/FCC||CE /RoHs/FCC ||CE /RoHs/FCC ||CE/RoHS/FCC |
|Lamp Material||Iron & Aluminum||Iron & Aluminum||Iron & Aluminum||Iron & Aluminum|
|Working Environment||-20∼40℃, 45%∼95%RH||-20∼40℃, 45%∼95%RH||-20∼40℃, 45%∼95%RH||-20∼40℃, 45%∼95%RH|
|LED Quantity||150LEDS 3W||200LEDS 3W||250LEDS 3W||300LEDs 3w||400LEDs 3W|
|Color||Full Spectrum||Full Spectrum||Full Spectrum||Full Spectrum||Full Spectrum|
|Chip Brand||3W Epistar/Epileds||3W Epistar/Epileds||3W Epistar/Epileds||3W Epistar/Epileds||3W Epistar/Epileds|
|Certification||CE/RoHs/FCC ||CE/RoHs/FCC ||CE/RoHs/FCC ||CE/RoHs/FCC||CE/RoHS/FCC|
|Lamp Material ||Iron& Aluminum ||Iron& Aluminum ||Iron & Aluminum ||Iron& Aluminum||Iron&Aluminum|
|Working Environment||-20∼40℃, 45%∼95%RH||-20∼40℃, 45%∼95%RH||-20∼40℃, 45%∼95%RH||-20∼40℃, 45%∼95%RH||-20∼40℃, 45%∼95%RH|
How does the Specific Wavelength work for the plants ?
*Do not use the lights in dripping water or anywhere they will get wet,water and dlectricity can be dangerous mixture.
*The working environment for LED grow light is -20∼40℃,45%∼95%RH.
*To protect the light,Please cut off the power when there is lighting strike.
*Do not touch or move when the light is working.
*Tips for increasing lifespan:please let the light have a rest about 20mins after 5∼6hours working.
No-glue design,very easy for repairment and maintenance. Only few steps to assemble up the whole fixture.
Better Cooling Performance
Chill airflow was sucked from the upper cage and then vented through the lower level air outlet in a very high speed because of the fan's enormous pressure. The high speed chill airflow takes the heat away from the heat sink very efficiently and will never return to the upper cage again after cooling the heat sink because of the obstruction of the baffle which is in the middle of the fixture. As such, the thermal cycle was cut off and better cooling performance acquires.
Better protection & Lower Noise
Not like the previous fan's installation,new double cages structure covers the vulnerable fans inside to protect them from external disturbance.This structure also substantially reducing the fan's noise while increasing the whole light's waterproofing capability and dust preventing capability due to its enclosed construction.
700 MA is a Benchmark
700 MA is a benchmark electric current for 3W LEDs,runing LEDs with possibly high current can take full advantage of LEDs, making your initial investment in LED devices to be well worth it.However, LEDs and LED drivers should be of superior quality as so to undertake the high electric current, besides the entire equipment should be good enough in heat dissipating to bear all the heat emitted by 3w leds.CIDLY selects the finest LEDs and drivers to ensure the stable performance as well as the long life span of the fixtures,our three-year warranty policy proves our confidence in products.
IP52 rating against dust and water-drops
The lid of the light is with sloping ends and angled holes to prevent the light from the damaging of drippage and dust.
The multifunctional model is the ultimate model of ZA,it is the combination of all features above and bringing you more. Considerations have been given to the over heat protection and energy saving,when the temperature is low within the fixture,fans stop running so as to save energy while if it is over heat,the power will cut off automatically to protect the fixture.
Spectrum Test Report to show what wavelength we use.
Light Distribution FYI .
Daisy-Chain Function to connect several light together .
How to replace a module separately if any module broken?